The Ericson 36 is an American

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

that was designed by

Ron Holland Ronald John Holland (born 1947 in Auckland, New Zealand)Ron Holland:Desi ...

as a racer and first built in 1980.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 282-283. Houghton Mifflin Company, 1994. The Ericson 36 is often confused with a completely different 1975 design, the Ericson 36C.

Production

The design was built by Ericson Yachts in the

United States The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territorie ...

. The company completed 32 examples between 1980 and 1984, but it is now out of production.

Design

The Ericson 36 is a recreational

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open wat ...

, built predominantly of

fiberglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cloth ...

, with wood trim. It has a

masthead sloop A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast. The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails, ...

rig, a

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, a

reverse transom A transom is the vertical reinforcement which strengthens the stern of a boat. This flat termination of the stern is typically above the waterline. The term was used as far back as Middle English in the 1300s, having come from Latin ''transvers ...

, an internally mounted spade-type

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...

controlled by a

wheel A wheel is a circular component that is intended to rotate on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machines. Wheels, in conjunction wi ...

and a fixed fin

keel The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in Br ...

. It displaces and carries of ballast. The boat has a draft of with the standard keel fitted. The Ericson 36 is fitted with a Universal M-25

diesel engine The diesel engine, named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel is caused by the elevated temperature of the air in the cylinder due to mechanical compression; thus, the diesel engine is a so-call ...

of for docking and maneuvering. The fuel tank holds and the fresh water tank has a capacity of . The design has a notably straight deck sheer line. Sleeping accommodation for seven is provided and includes a bow "V"-berth, two main cabin double settee berths and an aft pilot berth. The

galley A galley is a type of ship that is propelled mainly by oars. The galley is characterized by its long, slender hull, shallow draft, and low freeboard (clearance between sea and gunwale). Virtually all types of galleys had sails that could be used ...

is located at the foot of the

companionway In the architecture of a ship, a companion or companionway is a raised and windowed hatchway in the ship's deck, with a ladder leading below and the hooded entrance-hatch to the main cabins. A companionway may be secured by doors or, commonly in ...

steps, on the port side and includes a two-burner, alcohol-fired stove. The sink has both pressurized water and foot-pump fresh and salt water. A navigation station is fitted to starboard. The

head A head is the part of an organism which usually includes the ears, brain, forehead, cheeks, chin, eyes, nose, and mouth, each of which aid in various sensory functions such as sight, hearing, smell, and taste. Some very simple animals may ...

is just aft of the "V"-berth and on the starboard side. The cabin sole is made from

teak Teak (''Tectona grandis'') is a tropical hardwood tree species in the family Lamiaceae. It is a large, deciduous tree that occurs in mixed hardwood forests. ''Tectona grandis'' has small, fragrant white flowers arranged in dense clusters (panicl ...

and

holly ''Ilex'' (), or holly, is a genus of over 570 species of flowering plants in the family Aquifoliaceae, and the only living genus in that family. ''Ilex'' has the most species of any woody dioecious angiosperm genus. The species are evergreen o ...

, while the main cabin folding table is teak, as are the cockpit seats. Ventilation is provided by two deck hatches, one over the main cabin and one over the forward cabin. The

mainsail A mainsail is a sail rigged on the main mast of a sailing vessel. * On a square rigged vessel, it is the lowest and largest sail on the main mast. * On a fore-and-aft rigged vessel, it is the sail rigged aft of the main mast. The sail's foot ...

mainsheet traveler A traveller is a part of the rigging of a boat or ship that provides a moving attachment point for a rope, sail or yard to a fixed part of the vessel. It may take the form of anything from a simple ring on a metal bar or a spar to, especially in a ...

is mounted to the bridge deck. There are both inboard and outboard

genoa Genoa ( ; it, Genova ; lij, Zêna ). is the capital of the Italian region of Liguria and the List of cities in Italy, sixth-largest city in Italy. In 2015, 594,733 people lived within the city's administrative limits. As of the 2011 Italian ce ...

tracks. Two primary cockpit winches are provided along with two secondary, plus four cabin-top winches for the

halyard In sailing, a halyard or halliard is a line (rope) that is used to hoist a ladder, sail, flag or yard. The term ''halyard'' comes from the phrase "to haul yards". Halyards, like most other parts of the running rigging, were classically made of n ...

s. An optional

staysail A staysail ("stays'l") is a fore-and-aft rigged sail whose Sail components#Edges, luff can be affixed to a stays (nautical), stay running forward (and most often but not always downwards) from a mast (sailing), mast to the deck (ship), deck, the b ...

may be flown, using an adjustable track. The design has a

PHRF Performance Handicap Racing Fleet (PHRF) is a handicapping system used for yacht racing in North America. It allows dissimilar classes of sailboats to be raced against each other. The aim is to cancel out the inherent advantages and disadvantages ...

racing average handicap of 108.

Operational history

In a 1994 review Richard Sherwood wrote, "this Ericson is a racing boat, but the construction technique minimizes weight, allowing for a full cruising interior. Ballast constitutes 45 percent of the total displacement, so she should be stiff."

References

{{Ericson Yachts Keelboats 1980s sailboat type designs Sailing yachts Sailboat type designs by Ron Holland Sailboat types built by Ericson Yachts

Production

Design

Operational history

See also

References